Outdoor Led 10W Solar LED Reflector IP65 Waterproof Led Solar Flood Light
Technical Parameter:
Product |
Power |
Lumen |
Solar panel |
Lithium battery |
Working time |
Material |
IP |
Function |
SOLAR
WALL LIGHT |
2W |
200lm±10% |
1W/5V/200mAh |
18650 1800mAh |
8-9H |
ABS+PC |
IP54 |
when people come, the light is on;
After people leave, light off;
Lamp works all night.
Optical control + PIR sensor |
SOLAR
WALL LIGHT |
8W |
800lm±10% |
1W/5V/200mAh |
18650 2600mAh |
12-13H |
ABS+PC |
IP54 |
SOLAR
WALL LIGHT |
16W |
1600lm±10% |
1W/5V/200mAh |
18650 3000mAh |
14-15H |
ABS+PC |
IP54 |
FIRST USE
To verify if the lamp is ready, cover the solar panel with your hnd and see if the light turns on.
If the light doesn't turn on, place the lamp under direct sunlight for 2-3 days to charge up the battery.
PIR motion sendor, when people come, the light on, and people leave, light off; Energy saving;
Do not place your solar panel in shaded area or behind glass. Install the lamp in a South facing location that is not obstructed by buildings, fences, trees, sheds, bushes or the shadows that these create. Please note that a poor installation location will drastically reduce the performance of the product.
The solar panels should be exposed under direct sunshine for 14-15 hours to ensure it is suffiffifficiently recharged.
Clean the surface of the solar panel and light lens with a soft, slightly moistened cloth. Do not use corrosive cleansing agents or
chemical solutions since this may damage the surfaces and impair operation. Keep the solar panel free of dirt, debris and snow or
the battery might not charge properly. This may also shorten battery life or cause malfunction